Vt Commodore Rear Suspension Diagram
Suspension Kit
Enhancement Bush Kit
Kit contains:
- Front Strut Bar To Chassis Mount Bush Kit
- Front Control Arm Lower-Inner Bush Kit
- Front Strut Bar To Lower Control Arm Bush Kit
- Front Sway Bar Link to Strut Kit
- Rear IRS Adjusting Camber & Toe Kit
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front and Rear
- Fitting Time [min.]: 630
- Part of kit: (x)
- Front and Rear
- KIT137K
- 1
- 4
- SuperPro Vehicle Kit
- $549.00
- More Info
- BUY NOW
Sway Bar Stabiliser Kit
30mm Heavy Duty Non Adjustable Sway Bar
Selby Classic Range by Roll Control. Finished in Black with Black SuperPro Bushings
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 90
- Part of kit: (x)
- Front
- SHF43
- 1
- 1SB,2B
-
- $401.00
- More Info
- BUY NOW
Suspension Kit
Alignment Bush Kit - Front End
Kit contains:
- Front Strut Bar To Chassis Mount Bush Kit
- Front Strut Bar To Lower Control Arm Bush Kit
- Front Control Arm Lower-Inner Bush Kit
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 330
- Part of kit: (x)
- Front
- KIT153K
- 1
- 8B, 6T,10W
- SuperPro Vehicle Kit
- $251.00
- More Info
- BUY NOW
Bump Stop
Bump Stop Kit
2 x Bump Stops & 2 x Boots per kit, 54mm Long x 67.5 Wide x 20-22mm Inside Diameter
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 120
- Part of kit: (x)
- Front
- SPF1833BK
- 1
- 2BS,2BSB
-
- $101.00
- More Info
- BUY NOW
Spring Cap
Coil Spring Spacer Bush Kit
A=164mm B=127.5mm C=10mm
Vehicle Application Information:
- 10mm Spacer
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 150
- Part of kit: (x)
- Front
- SPF2365-10K
- 2
- 1B
-
- $30.00
- More Info
- BUY NOW
Spring Cap
Coil Spring Spacer Bush Kit
A=164mm B=127.5mm C=5mm
Vehicle Application Information:
- 5mm Spacer
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 150
- Part of kit: (x)
- Front
- SPF2365-5K
- 2
- 1B
-
- $20.00
- More Info
- BUY NOW
Left and Right Arms for Standard Replacement and Repair Upgrade
Control Arm
Control Arm Lower Assembly Kit
Left and Right Arms for Standard Replacement and Repair Upgrade
Vehicle Application Information:
- standard replacement
These arms utilise the SuperPro bushings and are manufactured from a high strength material. SuperPro Tip - SuperPro strongly advises that both arms should always be replaced at the same time to maintain the correct geometry and operation of the vehicle.
By eliminating the O.E style rubber bushing, these arms have been optimised for longevity, durability and performance, without any unwanted NVH.
SuperPro Control Arms are perfectly suited as a standard replacement and are an upgrade from the factory arms, eliminating the undesirable arm movement to maintain better steering geometry in all driving conditions.
- Axle alignment required after fitting
- Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting Time [min.]: 60
- Part of kit: (x)
- Front
- TRC1104
- 1
- 2 ARMS
-
- $270.00
- More Info
- BUY NOW
Control Arm-/Trailing Arm Bush
Control Arm Lower-Inner Bush Kit
Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations.
Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution.
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 150
- Part of kit: KIT153K (x1)
- Front
- SPF1232K
- 1
- 2B,2T
-
- $64.00
- More Info
- BUY NOW
Upper replacement of OEM 92002882
Spring Cap
Spring Insulator Bush Kit
Upper replacement of OEM 92002882
A=165mm B=128.7mm C=5.5mm D=13.5mm E=138mm, Helical Spring Seat
Vehicle Application Information:
- Upper replacement of OE # 92002882
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 120
- Part of kit: (x)
- Front
- SPF2498K
- 1
- 2B
-
- $58.00
- More Info
- BUY NOW
Bush, steering rack
Steering Rack & Pinion Mount Bush Kit
Vehicle Application Information:
- Left hand side only
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 120
- Part of kit: (x)
- Front
- SPF1632K
- 1
- 1B
-
- $23.00
- More Info
- BUY NOW
Kit, caster adjustment
Strut Bar To Chassis Mount Bush Kit
Adjustable Caster Kit - Heavy Duty Option
Alignment Correction
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 120
- Part of kit: (x)
- Front
- SPF2339-90K
- 1
- 2T,10W,2P,2B
-
- $278.00
- More Info
- BUY NOW
Bush, strut mount
Strut Bar To Chassis Mount Bush Kit
Non Adjustable Kit
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 120
- Part of kit: (x)
- Front
- SPF2339EK
- 1
- 2B, 4W
-
- $165.00
- More Info
- BUY NOW
Kit, caster adjustment
Strut Bar To Chassis Mount Bush Kit
Adjustable Caster Kit
Alignment Correction
Super Pro Adjustable Strut Bar To Chassis Mount Bush Kit is considered one of those "must have" bushing replacements for the GMH vehicles. From the factory, the Strut bar is secured to the front subframe with a soft, fluid-filled bushing that breaks down prematurely. Its job is to absorb most of the braking load while locating the wheel and control arm for caster. However, when this bushing breaks down, it results in excessive wheel movement under braking resulting in degraded braking performance, pedal feel and increased tyre wear.The SuperPro Adjustable Strut Bar To Chassis Mount Bush Kit correct and prevent this issue and can provides increased caster adjustment for improved handling.
It is the perfect repair, repair upgrade or performance solution.
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 120
- Part of kit: KIT153K (x1)
- Front
- SPF2339K
- 1
- 2
-
- $208.00
- More Info
- BUY NOW
Bush, strut mount
Strut Bar To Lower Control Arm Bush Kit
Comfort option to be used with SPF2339K
Suited to cast steel arms
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 150
- Part of kit: KIT153K (x1)
- Front
- SPF0756CK
- 1
- 4B,2T
-
- $51.00
- More Info
- BUY NOW
Bush, strut mount
Strut Bar To Lower Control Arm Bush Kit
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 150
- Part of kit: KIT137K (x1)
- Front
- SPF0756K
- 1
- 4W,2T,4B
-
- $51.00
- More Info
- BUY NOW
Bolt, axle strut
Strut Bolt Replacement Kit
- Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 60
- Part of kit: (x)
- Front
- SPF4960K
- 2
- 2B, 3N
-
- $63.00
- More Info
- BUY NOW
Bush, strut mount
Strut Top & Bearing
Standard Repair Upgrade Kit.
Kit contains SuperPro Hybrid Mounts, Bearings & Washers.
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 120
- Part of kit: (x)
- Front
- SPF1590AK
- 1
- 2Mounts,2Bearings,4W
-
- $215.00
- More Info
- BUY NOW
Bush, strut mount
Strut Top & Bearing
Performance Kit.
Kit contains SuperPro Polyurethane Mounts & Bearings.
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 120
- Part of kit: (x)
- Front
- SPF1590BK
- 1
- 2B,2Bearings
-
- $276.00
- More Info
- BUY NOW
Bushes only to suit after-market sway bar
Sway Bar Bush Kit
Sway Bar Link Bush Kit
Bushes only to suit after-market sway bar
Vehicle Application Information:
- Bushes only to suit after-market sway bar & SPF0987K
- Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 45
- Part of kit: (x)
- Front
- SPF0994K
- 1
- 8B
-
- $34.00
- More Info
- BUY NOW
Replacement bushings for SPF0987K
Bush, shock absorber
Sway Bar Link Bush Kit
Replacement bushings for SPF0987K
- Fitting Difficulty: moderate
- Fitting Position: Front
- Part of kit: (x)
- Front
- SPF2755LK
- 2
- 4B
-
- $20.00
- More Info
- BUY NOW
H/Duty link rod replacement & bushing kit
Sway Bar Stabiliser Kit
Sway Bar Link to Strut Kit
H/Duty link rod replacement & bushing kit
Vehicle Application Information:
- H/Duty link rod replacement & bushing kit
- Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 90
- Part of kit: KIT137K (x1)
- Front
- SPF0987K
- 1
- 8B,8W,2R,4N
-
- $56.00
- More Info
- BUY NOW
Sway Bar Bush Kit
Sway Bar Mount Bush Kit
available Sizes 14, 16, 18, 19, 20, 22, 23, 24, 25, 26, 27, 28, 30 & 32mm
Sway Bar mount bushes are an important part of the whole sway bar system.
Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar.
An upgrade to SuperPro bushings can return lost sway bar performance and improve handling.
Vehicle Application Information:
- 28mm ID
- Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 45
- Part of kit: (x)
- Front
- SPF1453-28K
- 1
- 2B
-
- $31.00
- More Info
- BUY NOW
Sway Bar Bush Kit
Sway Bar Mount Bush Kit
available Sizes 14, 16, 18, 19, 20, 22, 23, 24, 25, 26, 27, 28, 30 & 32mm
Sway Bar mount bushes are an important part of the whole sway bar system.
Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar.
An upgrade to SuperPro bushings can return lost sway bar performance and improve handling.
Vehicle Application Information:
- 30mm ID
- Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 45
- Part of kit: (x)
- Front
- SPF1453-30K
- 1
- 2B
-
- $31.00
- More Info
- BUY NOW
Sway Bar Bush Kit
Sway Bar Mount Bush Kit
available Sizes 14, 16, 18, 19, 20, 22, 23, 24, 25, 26, 27, 28, 30 & 32mm
Sway Bar mount bushes are an important part of the whole sway bar system.
Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar.
An upgrade to SuperPro bushings can return lost sway bar performance and improve handling.
Vehicle Application Information:
- 32mm ID
- Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 45
- Part of kit: (x)
- Front
- SPF1453-32K
- 1
- 2B
-
- $31.00
- More Info
- BUY NOW
Sway Bar Stabiliser Kit
18mm Heavy Duty 2 Position Blade Adjustable Sway Bar
Selby Classic Range by Roll Control. Finished in Black with Black SuperPro Bushings
The Ultimate Handling Package! Fitting larger sway bars has two main effects on
- Vehicle balance in terms of understeer and oversteer
- Increased roll resistance
Both these effects provide increased tyre contact and grip for a vehicle.
dd in the SuperPro Adjustable sway bar links to:
- Eliminate sway bar link flex
- Adjust in neutral sway bar positioning
- Maximize all positions on the adjustable Sway Bars
All this will give the vehicle balanced and upgraded tyre contact and dynamic grip which delivers the ultimate handling package for your Vehicle! From our testing, this is what we recommend as a good starting point:
- Scenario one is to set both bars to the hardest setting and is ideal for a vehicle with standard suspension, wheels and tyres.
- Scenario two is to set the front to the soft setting and the rear to the hardest setting and is ideal for a vehicle with lowered springs, or with larger, wider wheels and tyres.
- Scenario three is to set both bars to the soft setting and is ideal for a vehicle fitted with a coil over kit or sports suspension pack.
Vehicle Application Information:
- 2 Position Ajustable
- Fitting Difficulty: moderate
- Fitting Position: Rear
- Fitting Time [min.]: 120
- Part of kit: (x)
- Rear
- SHR50A
- 1
- 1SB,2B
-
- $244.00
- More Info
- BUY NOW
Bump Stop
Bump Stop Bush Kit - Upper
- Fitting Difficulty: moderate
- Fitting Position: Rear
- Fitting Time [min.]: 45
- Part of kit: (x)
- Rear
- SPF3906K
- 1
- 2B
-
- $85.00
- More Info
- BUY NOW
Control Arm-/Trailing Arm Bush
Control Arm Bush Kit
Vehicle Application Information:
- IRS ( Independent Rear Suspension )
- IRS vehicles require 2 kits if not using adjuster kits (SPF2545K).
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 180
- Part of kit: (x)
- Rear
- SPF0611K
- 2
- 2T,4B
-
- $73.00
- More Info
- BUY NOW
Bush, sub-frame
Crossmember Supplement Washers Bush Kit
To suit OE Bush
HSV series use lower bushing only as factory is solid top
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 120
- Part of kit: (x)
- Rear
- SPF0840K
- 1
- 4B
-
- $179.00
- More Info
- BUY NOW
Bush, differential mount
Differential Mount Insert
Fits into voiding of original bushings - reduces unwanted differential movement
Designed to fit into the voiding of the original rubber differential mount to eliminate excessive driveline movement to deliver an improved gear shift feel and superior power transmission through to the wheels.
This mount insert will also lengthen the life of the original mount.
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 30
- Part of kit: (x)
- Rear
- SPF4170K
- 1
- 1B
-
- $48.00
- More Info
- BUY NOW
Suspension Kit
IRS Adjusting Camber & Toe Kit
Suited to vehicles without Factory Toe Adjusting Arm
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 240
- Part of kit: KIT137K (x1)
- Rear
- SPF0877K
- 1
- 8B,4T,1IS
-
- $231.00
- More Info
- BUY NOW
Suspension Kit
IRS Adjusting Kit Toe Only Bush Kit
Suited to vehicles without Factory Toe Adjusting Arm
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 150
- Part of kit: (x)
- Rear
- SPF0877TK
- 1
- 2T,4B
-
- $161.00
- More Info
- BUY NOW
Solid & IRS axle
Bracket, stabilizer mounting
Shock Absorber Upper Bush Kit
Solid & IRS axle
Vehicle Application Information:
- Solid & IRS axle
- Fitting Difficulty: moderate
- Fitting Position: Rear
- Fitting Time [min.]: 60
- Fitting Difficulty: moderate
- Fitting Position: Rear
- Fitting Time [min.]: 60
- Part of kit: (x)
- Rear
- SPF0201K
- 1
- 4B
-
- $27.00
- More Info
- BUY NOW
IRS Raises vehicle approximately 15mm
Spring Cap
Spring Insulator Lower Bush Kit
IRS Raises vehicle approximately 15mm
A=138mm B=33.8mm C=10mm
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 60
- Part of kit: (x)
- Rear
- SPF1358-10K
- 2
- 1B
-
- $39.00
- More Info
- BUY NOW
IRS Raises vehicle approximately 9mm
Spring Cap
Spring Insulator Lower Bush Kit
IRS Raises vehicle approximately 9mm
A=138mm B=33.8mm C=6mm
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 60
- Part of kit: (x)
- Rear
- SPF1358-6K
- 2
- 1B
-
- $27.00
- More Info
- BUY NOW
IRS Raises vehicle approximately 12mm
Spring Cap
Spring Insulator Lower Bush Kit
IRS Raises vehicle approximately 12mm
A=138mm B=33.8mm C=8mm
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 60
- Part of kit: (x)
- Rear
- SPF1358-8K
- 2
- 1B
-
- $33.00
- More Info
- BUY NOW
Standard Replacement Kit
Bush, sub-frame
Subframe Front Bush Kit
Standard Replacement Kit
Standard Replacement Kit
IRS only
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 180
- Part of kit: (x)
- Rear
- SPF3267K
- 1
- 4B,2T
-
- $239.00
- More Info
- BUY NOW
Competition/Race Kit
Bush, sub-frame
Subframe Front Bush Kit
Competition/Race Kit
Competition/Race Kit
IRS only
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 180
- Part of kit: (x)
- Rear
- SPF3367K
- 1
- 4B,2T
-
- $269.00
- More Info
- BUY NOW
Sway Bar Bush Kit
Sway Bar Link Bush Kit
- Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Time [min.]: 90
- Part of kit: (x)
- Rear
- SPF0513K
- 1
- 4T,8B
-
- $83.00
- More Info
- BUY NOW
Sway Bar Bush Kit
Sway Bar Mount To Crossmember Bush Kit
available Sizes 12, 13, 14, 15, 16, 16.5, 17, 18, 19, 20, 22, 22.5, 23, 23.2, 24 & 25mm
Sway Bar mount bushes are an important part of the whole sway bar system.
Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar.
An upgrade to SuperPro bushings can return lost sway bar performance and improve handling.
Vehicle Application Information:
- 18mm ID
- Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Time [min.]: 45
- Part of kit: (x)
- Rear
- SPF0613-18K
- 1
- 2B
-
- $28.00
- More Info
- BUY NOW
Sway Bar Bush Kit
Sway Bar Mount To Crossmember Bush Kit
available Sizes 12, 13, 14, 15, 16, 16.5, 17, 18, 19, 20, 22, 22.5, 23, 23.2, 24 & 25mm
Sway Bar mount bushes are an important part of the whole sway bar system.
Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar.
An upgrade to SuperPro bushings can return lost sway bar performance and improve handling.
Vehicle Application Information:
- 19mm ID
- Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Time [min.]: 45
- Part of kit: (x)
- Rear
- SPF0613-19K
- 1
- 2B
-
- $28.00
- More Info
- BUY NOW
Sway Bar Bush Kit
Sway Bar Mount To Crossmember Bush Kit
available Sizes 12, 13, 14, 15, 16, 16.5, 17, 18, 19, 20, 22, 22.5, 23, 23.2, 24 & 25mm
Sway Bar mount bushes are an important part of the whole sway bar system.
Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar.
An upgrade to SuperPro bushings can return lost sway bar performance and improve handling.
Vehicle Application Information:
- 20mm ID
- Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Time [min.]: 45
- Part of kit: (x)
- Rear
- SPF0613-20K
- 1
- 2B
-
- $28.00
- More Info
- BUY NOW
Source: https://superpro.com.au/tradeview/index.php?view=parts_vehicleapplication&cid=999501045
Post a Comment for "Vt Commodore Rear Suspension Diagram"